| mods done are...July 1 2008 at 5:30 AM | dee (Login ecophon)
YF |
Response to QB is .20 |
| The probe is a 2mm pin type
Valve has been flowed with 4 2.5mm holes and he valve stem has been done (all part of a kit in the uk)
The transfer port is a 5mm od 4mm id brass tube that pushes into the valve and reaches to the barrel port which was set by Rich and all fits together well.
The hammer spring is externally adjustable, and when tensioned fully seems to have little effect on the power.
The barrel seals are new as supplied by Rich
I am using 12g crosman powerlets.
Will try again today and order some heavier pellets.
Cheers all
d
|
| | Responses |
|
|
