<< Previous Topic | Next Topic >>Return to Index  

Any of you guys set up your QB's with .25 and C02?

July 5 2008 at 2:17 AM
  (Login Trojan1994)
YFOT

If so, what kind of accuracy and power are you getting? What length of barrel are you using?

Regards,

Tony

 
 Respond to this message   
AuthorReply

(Login gubb33ps)
YF

Co2 seems to work well in larger bores.

July 5 2008, 11:00 AM 

Bought one from Roy at Mountain Air. He used a 24" .25 barrel, some nicely done valve and transfer port work, a slightly lightened hammer, and a some other nice touches. Will shoot light (20-21gr.) pellets to 660-670fps and the big heavy Kodiak's (30.7gr) to 585fps...so it's a 22-23foot pound rifle. Roy does very nice work.

The muzzle device below is my own bit of ugliness....makes the barrel a good bit longer, but it's easily detached. Cutting the tube, inletting, and adding the Qb79 gas block is also my own bit of cobbling. Didn't change the performance, still shoots as fast and as well as it did before.
[IMG][/IMG]

Haven't done the official 50yard testing...have tested pellets at 20yards (haven't been able to get decent weather, a day off, and the .25 together in one place yet). Unofficially, from plinking small items at 45-55yards, it's probably going to be in the 3/4 - 1" class at 50yards.

One 20yard tests:
[IMG][/IMG]

.25 Qb certainly isn't going to be a great all-around rifle. Pellets cost too much and the trajectory isn't as flat as faster shooting rifles. Hunting is the one thing .25's do better, this one was set up to be my new tree squirrel hunter.


    
This message has been edited by gubb33ps on Jul 5, 2008 11:18 AM
This message has been edited by gubb33ps on Jul 5, 2008 11:12 AM
This message has been edited by gubb33ps on Jul 5, 2008 11:11 AM
This message has been edited by gubb33ps on Jul 5, 2008 11:03 AM


 
 Respond to this message   
TimN
(Login TimN5)
YF

Re: Any of you guys set up your QB's with .25 and C02?

July 7 2008, 1:44 AM 

I have one made by Roy as well. It is very accurate, love those Walthar barrels. Same length and mods as the previous poster. I am getting similar numbers.

Very accurate, more so that my .177 and .22, which only have the stock barrels.

A great gun for hunting and plinking.

[IMG][/IMG]

TimN

P.S. The stock is a hand carve creation, since I can't stand the factory wood. I did/do carve stocks for the QB and now the Discovery.

TimN

 
 Respond to this message   
Current Topic - Any of you guys set up your QB's with .25 and C02?
  << Previous Topic | Next Topic >>Return to Index  

Click The Banner To Visit Sportsmantarget

D I S C L A I M E R
JK's Airgun Forums, moderators, and administrators are not responsible for any problems that may occur from reading or using content posted on this forum, as they are the exclusive responsibility of two parties: the person who posted it and the person who acted on said posted information.Use of our forums from people under 18 years old only with legal guardian(s) present.