if so, i need some direction it seems. i have taken out the ones towards the muzzle end and the front trigger housing. rear one doesnt move so now im stuck. any info is greatly appreciated. i have used the search on this and the yellow but not much for this rifle. thanks for reading this post

shoot straight and speak the truth

not the one in front of it.

Russ S.

has helped someone out. really appreciate it. while i got you on the line have you ever come across parts or breakdowns or anything on these guns ?
thanks
tom

shoot straight and speak the truth

Tom,

I understand that in Spain and other countries, people have been retrofitting the Gamo Shadow spring into the Norica Marvic which this gun is based on. Based on my measurements and testing, it would be a tight fit but I think with a bit of work it could be done. Based on my measurements, it looks like some of the seals that JM carries could be fitted to this gun. I have put together a dimensional drawing that covers the piston seal, piston, and front spring guide which should help with retrofits.

If you aren't into breaking new ground, you could try Compasseco and Umarex US for parts. Both have indicated that they would stock some but I haven't checked lately.
Compasseco sells the TF89 and Umarex sells the Hammerli Titan both of which use the same internals.

Russ S.