Big summer yardsale! Guns! Cocker Parts! Pumps! Rainmaker! (56k out!)
by
Hi everybody!
I'm trying to sell off a bunch of gear that I don't need anymore. I want to move this stuff so feel free to email me with offers, especially if you want to order packages!
mooresaml@comcast.net
All prices are negotiable, shipping not included (I'll be using USPS priority).
Unless otherwise stated, assume everything has scratches on it.
Most of this stuff has been heavily used/loved.
SPECIAL DEAL: TAKE EVERYTHING FOR $297 plus shipping!
1. 1999 Brass Eagle Rainmaker
Has a lot of modifications like an AGD vertical adapter, TLALOC chip, microswitch trigger, on/off switch, and LAPCO barrel, but I really never had time to complete or tune it. Was working last time I aired it up but not cycling very fast, probably needs Mad Marty mods. Also has an odd short problem that pops up sometimes if you turn it on and off too fast- I think I used too much solder when I put the switch in. Comes with both the stock shroud and a minicocker shroud I cut (badly) to fit.
Asking $100, mostly because I really like that LAPCO Bigshot barrel.
2. Frankenstein blowback. This is built from parts of, at last count, 14 different guns. I used a hacksaw to fastback it, and it has a TASO Winforce barrel and a Wrath clamping feed. Pretty ugly, but very unique. Was working last time I tried it out but the velocity was kind of erratic. May need to be resprung.
$30
3. Black Dragun. Unmolested and only used once. Has a few scratches here and there from sitting in my gear box but is still essentially a new 7-year-old gun. Has the neat snap-back bolt and adjustable sear too.
$30
4. ACI Maverick Deluxe. Very fun pump but I don't need it. Has a .45 grip adapter block and bottomline set up for right-handed use. Sight Rail is epoxied in place. Comes with elbow and velocity adjuster rod.
$39
5. Stingray 1/2. This is a Stingray one upper receiver on top of a hacked-up Stingray 2 lower receiver. Basically this is the left-over parts from another project gun. Works fine, and has a sawed-off Stingray 1 barrel that I honed out and polished back when I was in middle school.
$17
6. Vulcan converted to stock class $8
7. Vulcan not converted to stock class $8
$15 for both
8. Spyder Shutter. Sad to see this one go. Probably the most reliable marker I've owned. Trigger has been modifed inside and out and I don't think that's the original barrel.
$45
9. Viewloader Evolution Z-board. Unopened and sent to me by accident.
$15
10. ORIGINAL Viewloader 2000. Doesn't work most of the time but might be good for a museum exhibit. Has "ON/OFF" scratched into one side.
$18
11. PMI Piranha. This is an ex-rental gun and has some numbers engraved into the side. Has a down the barrel leak I can't fix and is missing the sight rail. Might be good for parts.
Comes with a rapidly breaking Phazer Force MP5-K shroud that fits over it pretty well.
$12
12. Squeegee scabbard. Buckles onto your leg and holds a squeegee (not included) It's kind of tearing up and you get some free pine needles stuck to the velcro.
$5
13. Parker Par-Koil remote hose w/ slide check. Does not come with On/Off adapter or quick disconnect.
$10
14. Brass Eagle collapsable squeegee. Works pretty well.
$4
15. Cocker sharkgrill shroud cover. This aluminum piece fits over the neoprene of a cocker shroud to give it an all-metal look. Hard to find these days.
$10.
16. Spyder body. Probably is missing the detent. No idea what kind of Spyder this would have been from.
$5.
17. Big heavy short minicocker barrel. This thing is heavy, thick, and old. Would look good with my retro viewloader.
$9
18. 16" DYE Boomstick for Tippmann 98. This one has a glued front. Not my style, but very quiet.
$25
19. 12" .689 CP cocker barrel in blue.
$16
20. Stingray parts. Comes with a stock bolt, valve body, transfer tube, 2 barrel pins, some cut-up Stingray 1 barrel shrouds, a Stingray 1 barrel, and a very rare Pro-Line bottomline adapter.
$25
21. PGP2K bolt. Has both the locking bearings.
$7
22. Random air fittings. Lots of 45 degree adapters, 2 microline fittings and a short length of microline, a microgauge, an old bottomline, a drilled-out AGD backbottle adapter, a scarred-up LAPCO dual tank adapter some sort of weird reverse-dovetail ASA (would be good for that remote system) and a drop-forward.
$19
23. Cocker stuff. Only the blue ram still works, the sledgehammer needs a re-build, and I wouldn't count on any of those 3-ways. There's an Evil and a Shocktech beavertail, as well as two older ones. A timing rod collar for the pre-threadded rods and 2 timing rods, one of them a flattened-out mini-length rod. Couple trigger parts too, some for a pre-98 frame. The ANS low pressure chamber is for pre-2K guns. There's two hammers and a non-threaded velocity adjuster that might be good for midget-length conversions. Also a bunch of top-hats and those little micro-threaded barbs.
$19
24. Spyder stuff. There are three bolts, 2 bolt venturis, two vertical elbows, an ASA with LPC chamber, a hammer, some sort of metric to NPT hose adapter thing.
$12
25. Wrath stuff. Ram sleeve, stock ASA (with locking tab) APC delrin ram w/ brass insert, and a BD5 board with the LCD screen and full-auto jumper.
$19
26. Smart Parts wood grips for a Sterling pump. One side has been lightly sanded to get rid of a burr and could stand to be re-finished.
$7
27. Eurogrip for Lonestar-compatible gun
$3
28. DYE carbon-pattern .45 grips. The pattern is flaking off just a tiny bit in the corners. Not really noticeable when on-gun.
$9
29. Phantom stock grip
$6
30. Blue one-piece Viewloader grip for old-style Mag or Cocker. Missing a tiny chunk right below the trigger guard.
$4
31. Stock Raptor .45 grip panels.
$1
32. Stock WGP 98 cocker grip panels
$2
33. 2001 PGP grip frame. Has all internals except safety.
$14
34. Pre-1998 Benchmark autocker grip frame. Trigger guard has been cut off and it's sanded bare aluminum. Pretty rough.
$4
35. old-style autococker grip frame - no internals
$3
36. Brass Eagle Tigershark grip frame. Has all internals, never used.
$7
37. Brass Eagle Raptor single-trigger grip frame right half. Hooray for pot metal!
$3
38. Old-style autococker grip frame modified to fit a PGP. No internals.
$3
39. Composite cocker.45 frame. Modified to fit PGP. Cracked. Probably useless.
$FREE with purchase
41. Diamond Labs grip cover for WGP inline regs. Locks on with grub screw. Kinda scratched but still very comfy and kind of rare.
$5
42. WGP Stock reg. Doesn't work, needs rebuild. Badly scratched up thanks to #41
$3
42. Pure Energy reg. Doesn't work, needs rebuild.
$4
44. Blue (!) WGP ergo reg. Doesn't work, needs rebuild.
$5
45. Most of an E-Rex electronic grip frame. I was planning on using these guts to relocate the trigger for an SKS rifle stock conversion. Never got off the ground. All the electronics work but the frame and grips are broken in places.
$11
46. several feet of cocker pneumatic hose in red, green, and clear.
$5
47. JT GOT timer. Needs a battery.
$FREE with purchase
48. OGI locking feedneck. Would fit a Wrath, Rex, or Dragun gun.
$6
49. Daisy red dot sight. Mounting rail is broken. Needs battery
$FREE with purchase
50. Brass Eagle Raptor single finger trigger
$1
51. Elbow
$1
52. Feedneck fits Wrath, Rex, or Dragun gun
$FREE with purchase
53. Elbow for pump guns to use pocket hoppers
$FREE with purchase
